GRAFT SIZER

Graft sizes:

• Small: measuring graft sizes from Ø4.5 mm up to Ø8.5 mm
• Large: measuring graft sizes from Ø9 mm up to Ø12 mm

Open and closed configurations

TIBIAL AIMER

Designed to create a tunnel in the tibial bone in correspondence with the ACL tibial insertion site 

Adjustable angle 45° - 70°

Locking mechanisms preventing bullet and lower arc slippage

TIBIAL AIMER BULLET

To be assembled with the aiming arc to create the tibial tunnel

Laser marked measuring scale for tibial tunnel length evaluation

CANNULATED AND NON-CANNULATED SCREWDRIVER

The screwdriver is used to properly place the Medacta PEEK interference screw (MectaScrew PEEK), ensuring the appropriate fixation of the graft

Two configurations:

• Cannulated screwdriver: T20 - T25 - T40
• Noncannulated screwdriver: T20 - T25 - T40

In case of a cannulated screwdriver, a Ø 1.1 mm Nitinol guidewire is available to guide the insertion

BONE WEDGE CHISEL

Designed to create bone wedges

KNEE MICROFRACTURE

Designed to pierce the bone surface 
Tip: 60°

FEMORAL AIMER ANTEROMEDIAL TECHNIQUE

Used to properly place a Ø2.4 mm k-wire in the femoral bone. It features circumferential laser markings and a tip that enables direct visualisation of the ACL insertion site and a nose which ensures a proper fit on the femoral condyle

Two configurations available:

• For Ø7 and Ø8 mm tunnels with at least 2 mm back wall offset
• For Ø9 and Ø10 mm tunnel with at least 2 mm back wall offset

FEMORAL AIMER TRANSTIBIAL TECHNIQUE

Used to properly place a Ø2.4 mm k-wire in the femoral bone. It features circumferential laser markings and a tip that enables direct visualisation of the ACL insertion site and a nose which ensures a proper fit on the femoral condyle

Two configurations available:

• For Ø7 and Ø8 mm tunnels with at least 2 mm back wall offset
• For Ø9 and Ø10 mm tunnel with at least 2 mm back wall offset